If you have actually got a laser cutter you’re seeking ways to optimize your investment. Below are 5 reasons to utilize a laser cutter with heat transfer vinyl:
Easier Weeding
No Fraying
Broaden right into Engraving and Etching
Warm Transfer Plastic Only Requires a Budget-friendly Cutter
Reduced Maintenance
Easier Weeding
Laser systems permit you to fine tune various settings to accomplish different results on the very same style.
Flatbed Kiss Trimming– A form of cutting through the product only, not via the products backing or service provider; which is the normal cutting procedure for CAD-CUT ® materials. The benefit is lasers are flatbed systems that can be dialed in to puncture one layer of Stress Delicate Poly-Twill ™ at a time. This makes the cutting procedure faster as well as format on the garment effective.
Vector Cutting– To burn out dental caries or to reduce entirely with all layers of the material or thing. The advantage is that if you laser cut these areas entirely out, you quicken the weeding procedure substantially.
Raster Ablation– The loss of surface product with dissipation or melting. The benefit is you can essentially dissolve great information that the common blade cutter would make difficult to weed
.
No Fraying.
Perma-TWILL ® has heat activated adhesive for irreversible application on the garment without stitching. When reduced with a laser the sides of the material are warm sealed so they do not fray.
Broaden right into Engraving & Etching.
Locate new sales possibilities by using your laser cutter to engrave or etch items. Raster Ablation allows you to accomplish this on numerous things with various dimension lenses. Depending on the laser, you can fit different sizes and shape items.
A 40 watt lens can etch onto a variety of surfaces, such as Poly-TWILL ™, glass, wood, and also anodized or painted steels. 40 watts can likewise puncture thin acrylic and also timber. Check your guidebook for specific settings and also standards.
Warm Transfer Vinyl Only Calls For an Economical Cutter.
Entry level laser systems are typically around 40 wants and warm transfer plastic just calls for a reduced wattage laser tube, 20-30 watts, to cut. Less power needed = reduced expense laser system.
Reduced Upkeep.
Due to the fact that reducing warm transfer plastic on a laser cutter utilizes so little power, the laser tube does not need to be replaced as typically. Periodically clean down the lens, mirrors, as well as laser tube with a mini fiber towel or shake out little items from the flatbed
.
Sharing is caring!